VLAN Routing crashed?? automatic route to vlan disappears automatic sometimes?

[Bytechanger]

Hi,

my network has 3 addresses.

on re1   172.30.90.0/24
VLAN on re1 172.16.0.1/16 (Guest)
VLAN on re1  10.1.3.1/24 (cam)

When I look in routes->Status.

At first there is automatic a gateway created by opnsense

After a time, a cannot reach from 172.30.90.0/24 the other lans.
when I look at routes->Status, the routes are lost.

I don´t know how? What I´am doing wrong?
At night I start a cron-job "Periodic interface reset".

Actually I have no access to 10.1.3.0 net?!


Greets

Byte

[Bytechanger]

Hi,

can anybody help me?
I don´t know, how to analyze and solve the problem.

Greets

Byte

[hbc]

System: Routes: Status shows your routing table.

And take care to use auto-detection for gateway in interface section.

[Bytechanger]

Hi,

thanks for help.

here are my route status, filtered to default and 10.1.3 and 172.16.0.

ipv4   default   XX.XXX.XXX.XXXX   UGS   145996   1492   pppoe0   WAN
ipv4   10.1.3.1   link#8   UHS   6   16384   lo0
ipv4   172.16.0.1   link#7   UHS   0   16384   lo0


On Interface-config,
IPv4 Upstream Gateway only can select Auto-detect!
Should I push + to add one custom?
I so, wich values ?
Gateway IPv4 127.0.0.1 ?
and so on ?


Greets

Byte

[Bytechanger]

Hi,

Problem is solved. I delete all VLANs and install again.
Now routes added automatic...

Greets

Byte