Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
19.1 Legacy Series
»
Development and Wireguard does not show up
« previous
next »
Print
Pages: [
1
]
Author
Topic: Development and Wireguard does not show up (Read 5611 times)
pfitscher
Newbie
Posts: 4
Karma: 0
Development and Wireguard does not show up
«
on:
January 25, 2019, 06:20:33 pm »
Hi,
i changed back and forth from Production to Development, but wireguard does not show up in the plugin list. Also tried to install it from cli withe no success (No packages available to install matching 'os-wireguard-devel' have been found in the repositories). What am i doing wrong? Right now i changed back to OPNsense 19.1.r2-i386
regards
thomas
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Development and Wireguard does not show up
«
Reply #1 on:
January 25, 2019, 06:28:04 pm »
You can install via CLI
pkg install os-wireguard-devel
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
pfitscher
Newbie
Posts: 4
Karma: 0
Re: Development and Wireguard does not show up
«
Reply #2 on:
January 25, 2019, 06:40:43 pm »
thx for your reply. I have been trying to install it over CLI it says: No packages available to install matching 'os-wireguard-devel' have been found in the repositories
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Development and Wireguard does not show up
«
Reply #3 on:
January 25, 2019, 07:29:21 pm »
Only OpenSSL, doesnt work with Libre .. sorry
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
pfitscher
Newbie
Posts: 4
Karma: 0
Re: Development and Wireguard does not show up
«
Reply #4 on:
January 25, 2019, 08:20:29 pm »
sorry, i don't get it?
Logged
fabian
Hero Member
Posts: 2769
Karma: 200
OPNsense Contributor (Language, VPN, Proxy, etc.)
Re: Development and Wireguard does not show up
«
Reply #5 on:
January 25, 2019, 09:08:35 pm »
OPNsense offers two different cryptographic libraries: OpenSSL and LibreSSL. Both are available to switch in the firmware settings. You can see which one you are using on the dashboard. If it says LibreSSL, the plugin is not available because the software (wireguard) cannot be built with LibreSSL.
Logged
franco
Administrator
Hero Member
Posts: 17703
Karma: 1615
Re: Development and Wireguard does not show up
«
Reply #6 on:
January 25, 2019, 11:00:35 pm »
Hi thomas,
We only provide Go-based packages such as WireGuard on the amd64 architecture.
Cheers,
Franco
Logged
pfitscher
Newbie
Posts: 4
Karma: 0
Re: Development and Wireguard does not show up
«
Reply #7 on:
January 25, 2019, 11:48:18 pm »
thank you all very much for your replies. I am using an older securepoint rc200 hardware with I386 Architektur. I wanted to give wireguard a try....
thx again
regards thomas
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
19.1 Legacy Series
»
Development and Wireguard does not show up
