[Solved] How do i add DNS entries for LAN systems?

[brandon3055]

I suspect i am overlooking something simple here but so far nothing i have found online has helped with this.

Im talking about mapping something like nas.lnet to a lan address like 192.168.1.133 so i can then use nas.lnet to access my nas web interface.

I only just switched to opnsense last night. Before that i was using pfsense. The way i had pfsense setup all i had to do was add a static mapping with a host and domain name to the DHCP server and it just worked. But i had been using that install for several years so i dont recall what i had to do to get that working.

So far in opnsense i have set host and domain name under System/settings/general and i have added a static entry with a host and domain name in Services/DHCPv4/LAN.
I also tried fiddling with Unbound DNS and OpenDNS but i'm not familiar with ether of those.

So. My question is. From a fresh opnsense install what steps would i have to take to get LAN DNS entries working?

[ruggerio]

you might talk from name resolution of your ips.

You will find this in unbound, bridging. Add a hostname and the appropriate IP of the host there.

[brandon3055]

I dont see bridging in unbound settings. (Services/Unbound DNS/???) Im guessing you may mean Overrides? If thats the case i have tried that but it does not seem to work.

[yannix]

I managed to accomplish this by enabling 'Register DHCP static mappings ' under 'Unbound DNS->General'.

Caveat: I'm new to opnsense too

HTH

[brandon3055]

Ok... So mega facepalm...
Turns out when i removed my static DNS mappings to 1.1.1.1 and 8.8.8.8 on my Linux Desktop i didnt actually reset the connection so my system was still contacting cloudflare directly for DNS lookup.