OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 18.7 Legacy Series »
  • Cannot get Port Forward to Work - TCP-8443 to TCP-443
« previous next »
  • Print
Pages: [1]

Author Topic: Cannot get Port Forward to Work - TCP-8443 to TCP-443  (Read 1953 times)

rkillcrazy

  • Newbie
  • *
  • Posts: 6
  • Karma: 0
    • View Profile
Cannot get Port Forward to Work - TCP-8443 to TCP-443
« on: October 06, 2018, 02:38:11 pm »
I'm trying to forward TCP-8443 to a web server, listening on the standard HTTPS port, inside my home network.  The ISP blocks incoming TCP-80 and TCP-443 hence, I'm using that alternative port.  Again, I'm new to opnsense but this should be straigh forward; this used to work on my old pfsense setup

I followed this well written and concise tutorial. 

I went to Firewall > NAT > Port Forward and set it up.  I allowed it to create its own firewall rule in Firewall > Rules > WAN. See the following screen shots.

The browser, when I go to visit the site, says the following which leads me to believe I'm actively getting blocked:
Code: [Select]
ERR_CONNECTION_REFUSED
« Last Edit: October 06, 2018, 02:42:30 pm by rkillcrazy »
Logged

Evil_Sense

  • Full Member
  • ***
  • Posts: 112
  • Karma: 15
    • View Profile
Re: Cannot get Port Forward to Work - TCP-8443 to TCP-443
« Reply #1 on: October 06, 2018, 03:27:09 pm »
Seems correct.
I assume you checked that the traffic arrives at your WAN address?
Do you see any blockings in Firewall > Log Files > Live View?
(Especially with destination being the WAN address (with ':8443', which would mean natting doesn't work properly (had this just yesterday, all of a sudden))
Logged

rkillcrazy

  • Newbie
  • *
  • Posts: 6
  • Karma: 0
    • View Profile
Re: Cannot get Port Forward to Work - TCP-8443 to TCP-443
« Reply #2 on: October 06, 2018, 04:00:01 pm »
None that I can see but, the filtering on the live view is less than ideal.  I'm able to filter by "WAN" and I see everything hitting the WAN.  I can also filter by ":443" and see some traffic but it looks like it's all outbound.  If I filter by ":8443", I get nothing at all.
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 18.7 Legacy Series »
  • Cannot get Port Forward to Work - TCP-8443 to TCP-443
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2