OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • SIP ALG issue after Upgrade /& Config import, Hyper-V Gen2 runs good!
« previous next »
  • Print
Pages: [1]

Author Topic: SIP ALG issue after Upgrade /& Config import, Hyper-V Gen2 runs good!  (Read 3080 times)

Meik

  • Newbie
  • *
  • Posts: 13
  • Karma: 1
    • View Profile
SIP ALG issue after Upgrade /& Config import, Hyper-V Gen2 runs good!
« on: February 02, 2018, 08:17:51 pm »
Hi there,

I have a Problem with our 3CX after upgrading from 17.7.12 to 18.1.1
The Firewall Checker say SIP ALG failed
--> https://www.3cx.com/docs/firewall-checker/#h.ikh44hto4r56

Before with 17.7.12, no issue.

I have tested:
Upgrade 17.17.12 (on 2016 Hyper-V Gen1) to 18.1.1, failed :-(
Backup and Restore on a new 18.1.1 (on 2016 Hyper-V Gen2), failed :-(

Check the "Firewall, Settings, Advanced, --> Firewall Optimization: conservative", (normally the Thing, where it hangs)

Any ideas?

Thanks, Meik

---

18.x runs von Hyper-V 2016 Gen2 (Secure Boot Disabled, like all Linux Guests) good, no issue in the moment
Logged

slackadelic

  • Full Member
  • ***
  • Posts: 117
  • Karma: 9
    • View Profile
Re: SIP ALG issue after Upgrade /& Config import, Hyper-V Gen2 runs good!
« Reply #1 on: February 02, 2018, 10:10:45 pm »
Take a look at the System -> Firmware -> Plugins

Look for: os-siproxd

See if enabling that helps.
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • SIP ALG issue after Upgrade /& Config import, Hyper-V Gen2 runs good!
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2