Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
[SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more (Read 5125 times)
gothbert
Jr. Member
Posts: 69
Karma: 7
[SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more
«
on:
March 22, 2018, 08:32:13 pm »
Hi,
upgraded from 18.1.3 to 18.1.5 recently. Now my LAN interfaces do not get IPv6 addresses any more as they did previously in the 18.1 series. The LAN interfaces are set to IPv6 Configuration Type: Track Interface (WAN). WAN has IPv6 address.
Rebooted several times, even with suricata turned off, without success. What logs should I have a look into on the search for the cause?
Kind regards
Boris
«
Last Edit: March 24, 2018, 11:34:08 am by gothbert
»
Logged
franco
Administrator
Hero Member
Posts: 17484
Karma: 1589
Re: 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #1 on:
March 22, 2018, 09:04:15 pm »
Hi there,
Is this PPPoE on WAN? Did you skip 18.1.4? if yes we have two versions to cover.
You can try:
# opnsense-revert -r 18.1.4 opnsense
Or...
# opnsense-revert -r 18.1.3 opnsense
Cheers,
Franco
Logged
gothbert
Jr. Member
Posts: 69
Karma: 7
Re: 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #2 on:
March 22, 2018, 09:15:34 pm »
I went from 18.1.3 to 18.1.4 to 18.1.5 in a few minutes without actually having a look at 18.1.4.
I will return to 18.1.3 and then upgrade one by one to see which version first causes the issue.
Thank you for the guidance. Will report back when I am done with the test.
Logged
BeNe
Full Member
Posts: 113
Karma: 13
Use *BSD and feel free!
Re: 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #3 on:
March 23, 2018, 08:22:13 am »
Just for Info:
Updated from 18.1.4 to 18.1.5 without any IPv6 issues.
Track the IPv6 WAN Interface for 9 LAN´s without any problem on last Update. So it´s not a general issue.
Logged
franco
Administrator
Hero Member
Posts: 17484
Karma: 1589
Re: 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #4 on:
March 23, 2018, 08:24:35 am »
Same here. It could be a fix interacting with a certain configuration in a bad way. But all actual IPv6 tracking changes are still on the development branch (but also work in a real work office install).
Logged
gothbert
Jr. Member
Posts: 69
Karma: 7
Re: 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #5 on:
March 23, 2018, 08:43:07 am »
Still investigating. Will keep you posted.
Some probability that it is a local problem that occured around the same time as I did the updates and thus got attributed to the update. Rebooted the cable modem in front of the OPNSense box and also had to disable/reenable a NAT rule (transparent proxying) which I received a complaint about by OPNSense after upgrading to 18.1.5 and which prevented me from accessing port 80 anywhere after downgrade to 18.1.3 - curious.
Which log files should I inspect to gain more insight on what might be happening?
- Boris
Logged
gothbert
Jr. Member
Posts: 69
Karma: 7
Re: [SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #6 on:
March 24, 2018, 11:38:07 am »
Hi,
I confirm that IPv6 interface tracking on OPNSense 18.1.5 works fine for me.
The issue was related to a misconfiguration of the upstream cable modem and not to OPNSense.
I beg your pardon for bothering you with a non-issue.
Best regards
Boris
Logged
franco
Administrator
Hero Member
Posts: 17484
Karma: 1589
Re: [SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more
«
Reply #7 on:
March 24, 2018, 01:32:07 pm »
Hi Boris,
Nice to hear, no worries at all... thanks for the quick resolve.
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
[SOLVED] 18.1.5: IPv6 interface tracking does not work for me any more