Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Firewall->Diagnostics->pfTables is empty
« previous
next »
Print
Pages: [
1
]
2
Author
Topic: Firewall->Diagnostics->pfTables is empty (Read 8421 times)
gonzo
Newbie
Posts: 35
Karma: 0
Firewall->Diagnostics->pfTables is empty
«
on:
February 13, 2018, 08:46:11 pm »
Hi
I created the alias type: URL Table (IPs), host (s):
http://ip.jchost03.pl/ip_zablokowane_ataki.txt
, and I added the rule to Firewall, but when I check pf Tables, is empty.
What is the reason that the table is empty ?
gonzo
Logged
slackadelic
Full Member
Posts: 124
Karma: 9
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #1 on:
February 13, 2018, 08:58:35 pm »
Can you screenshot the settings for the alias?
Logged
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #2 on:
February 13, 2018, 09:35:08 pm »
I am including the view of aliases and rules
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #3 on:
February 13, 2018, 09:41:26 pm »
You have the same alias url twice. Maybe deleting the one you don't use helps?
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #4 on:
February 13, 2018, 09:48:23 pm »
did not help
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #5 on:
February 13, 2018, 10:08:11 pm »
If you run this command from the shell, will it populate the pf table?
# configctl filter refresh_aliases
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
slackadelic
Full Member
Posts: 124
Karma: 9
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #6 on:
February 13, 2018, 10:26:10 pm »
Change the name of the list to something other than the same name of the URL you're using. Just name it test1 or test2 or something just as a test.
Logged
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #7 on:
February 13, 2018, 10:27:03 pm »
no, still empty
Logged
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #8 on:
February 13, 2018, 10:34:12 pm »
still empty II
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #9 on:
February 13, 2018, 10:42:04 pm »
Firehol is populated? Any other lists are working?
Btw, i think Firehol L1 contains spamhaus. You could verify and delete it if confirmed.
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #10 on:
February 13, 2018, 10:47:15 pm »
Yes, FireHOL is OK, drop, edrop deleted
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #11 on:
February 13, 2018, 10:50:29 pm »
If you configure Firewall Maximum Table Entries @ Firewall: Settings: Advanced to say.. 500000, will your other list work? After increasing the table entry, pls run "configctl filter refresh_aliases" again.
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #12 on:
February 13, 2018, 10:56:14 pm »
I set the value of this variable to 999999 at the very beginning of the configuration.
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #13 on:
February 13, 2018, 11:06:42 pm »
Delete the alias and recreate.. make sure there are no white spaces. Will this work?
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
gonzo
Newbie
Posts: 35
Karma: 0
Re: Firewall->Diagnostics->pfTables is empty
«
Reply #14 on:
February 13, 2018, 11:18:52 pm »
I delete Firewall: Rules: OPT1
I delete Firewall: Aliases
recreate alias and rules, and .... still empty
Logged
Print
Pages: [
1
]
2
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Firewall->Diagnostics->pfTables is empty
