Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
There is a Phase 2 using IPv4, you cannot use IPv6.
« previous
next »
Print
Pages: [
1
]
Author
Topic: There is a Phase 2 using IPv4, you cannot use IPv6. (Read 4228 times)
mwiora
Newbie
Posts: 18
Karma: 2
There is a Phase 2 using IPv4, you cannot use IPv6.
«
on:
December 14, 2016, 11:06:56 pm »
Hi all,
I've set up an IPv6 phase 1 connection, which contains two phase 2 entries.
One of them is IPv6, the other IPv4.
I have a stable connection for something 20 minutes up to 6 hours.
After that time (variable) the tunnel is still up and running, but no more packets are going through the tunnel..... Until I restart the IPsec strongswan service on one side (the other side remains untouched)...
I've set the log to "control" in all parts - I'll update the thread as soon as I found something interesting...
I suspected now that the dead-peer-connection is causing the issues and I wanted to disable it in phase 1, but I'm getting "There is a Phase 2 using IPv4, you cannot use IPv6.".
Why is it working anyway? For at least this limited time. Shouldn't it be configurable anyway?
cheers,
Matthias
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
There is a Phase 2 using IPv4, you cannot use IPv6.