Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
[SOLVED] Update 16.7.10 -> 11 thermal sensors (amdtemp)
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] Update 16.7.10 -> 11 thermal sensors (amdtemp) (Read 8947 times)
guest14952
Guest
[SOLVED] Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
on:
December 14, 2016, 10:23:09 pm »
after updating from 16.7.10 to 16.7.11 the widget >>thermal sensors<< shows nothing anymore.
the 16.7.10 config in System_advanced_misc/thermal sensors hardware (amdtemp) was still active in 16.7.11,
also disable and reenable doesn´t help.
my hardware: pc engines APU1D4 with amd g-t40e processor
a quick check in a terminal session shows that the kernel module >>amdtemp<< is not loaded (anymore?)
test:
sysctl dev.cpu.0 --> no temperature shown
kldstat | grep amd --> nothing
quick fix:
kldload amdtemp --> ... Load amdtemp ...
sysctl dev.cpu.1 --> temperature shown
thermal sensors in Dashboard|Lobby also working again!
... of course until next reboot, so my question is change it in freebsd or somewhere in the opnsense config?
Logged
max
Newbie
Posts: 7
Karma: 3
Re: Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
Reply #1 on:
December 15, 2016, 01:19:54 am »
Same issue on Intel hardware (Dell servers).
Couldn't look into this in detail, yet. But from a first glimpse it is the same problem here: the kernel module is not loaded on boot.
Logged
mw01
Newbie
Posts: 31
Karma: 4
Re: Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
Reply #2 on:
December 15, 2016, 02:45:57 am »
Same on an apu2 AMD GX-412TC SOC (4 cores). And aesni.ko did not load on boot either, but perhaps it's built into the new kernel, but it loads.
root@a:~ # kldload aesni
root@a:~ # kldstat | grep ae
42 1 0xffffffff8261a000 2275 aesni.ko
Logged
Solaris17
Full Member
Posts: 118
Karma: 17
Re: Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
Reply #3 on:
December 15, 2016, 03:34:00 am »
Same issue here on Intel hardware (coretemp)
like above work around is
# kldload coretemp
«
Last Edit: December 15, 2016, 05:19:56 am by Solaris17
»
Logged
franco
Administrator
Hero Member
Posts: 17485
Karma: 1589
Re: Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
Reply #4 on:
December 15, 2016, 07:20:06 am »
Hot-fixed in 16.7.11_1. Thanks for the quick report!
Requires a reboot or save from the System: Settings: Misc page.
Logged
max
Newbie
Posts: 7
Karma: 3
Re: [SOLVED] Update 16.7.10 -> 11 thermal sensors (amdtemp)
«
Reply #5 on:
December 15, 2016, 12:25:20 pm »
Hi Franco,
thanks a lot for for the quick fix. I can confirm this fix works on Intel and AMD platforms, no reboot required.
As you suggested, clicking "save from the System: Settings: Misc page" after applying the hot fix works just fine.
Best
Max
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
[SOLVED] Update 16.7.10 -> 11 thermal sensors (amdtemp)