[SOLVED] Hurricane Electric IPv6 Tunnel Broker Breaking WebGUI & apinger

[Aergan]

I've set up a HE.net tunnel following the related pfsense documentation:
https://doc.pfsense.org/index.php/Using_IPv6_on_2.1_with_a_Tunnel_Broker

Now, the configuration works but it seems to break the apinger service and cause WebGUI related issues.
When the OPT1 interface is enabled, the Gateway for the tunnel (Under System > Routing) cannot be edited, reports the connection is in IPv4 mode and ignores any changes made to rectify this.

apringer log:

Code: [Select]

Jul 24 09:58:06 apinger: No usable targets found, exiting
Jul 24 09:58:06 apinger: Starting Alarm Pinger, apinger(40909)
Jul 24 09:58:01 apinger: No usable targets found, exiting
Jul 24 09:58:01 apinger: Starting Alarm Pinger, apinger(36162)
Jul 24 09:47:01 apinger: No usable targets found, exiting
Jul 24 09:47:01 apinger: Starting Alarm Pinger, apinger(3095)
Jul 24 09:43:00 apinger: No usable targets found, exiting
Jul 24 09:43:00 apinger: Starting Alarm Pinger, apinger(18514)
Jul 24 09:40:37 apinger: No usable targets found, exiting
Jul 24 09:40:37 apinger: Starting Alarm Pinger, apinger(32390)
Jul 24 09:40:09 apinger: No usable targets found, exiting
Regardless of this, the tunnel itself actually does work though.

[Aergan]

Solved by:

OPNsense 15.7.6-amd64
FreeBSD 10.1-RELEASE-p16
OpenSSL 1.0.2d 9 Jul 2015

[franco]

Thanks. I am a little curious. Was this on 15.7.5 when it wasn't working or earlier?

[Aergan]

Thanks. I am a little curious. Was this on 15.7.5 when it wasn't working or earlier?

15.7.4, still broken 15.7.5 but started working as of 15.7.6. No configuration changes regarding it.